Dodge Charger saves life of suicide jumper

03 September 2010
2008 Dodge Charger

A 2008 Dodge Charger played the role of lifesaver on Tuesday when a man fell 400 feet and amazingly lived to see another day. The New York Post reports that 22-year-old Thomas Magill allegedly tried to commit suicide by jumping out of a 39-story New York high-rise when the aforementioned Charger broke his fall. Witnesses said that Magill flew through the air at "like 100 miles per hour" and landed on the Charger's rear window.

The man's impact sent glass flying everywhere and even knocked his tennis shoes clear off his feet and onto the windshield of another vehicle. After Magill hit the vehicle, witnesses claim the young man screamed that his legs hurt. Understandably.

While Magill lived through the tremendous fall, he's not out of the woods yet. He is reportedly listed in critical condition at a local New York hospital.

[Source: The New York Post]

Detroit 2010: Dodge Viper ACR 1:33 Edition

12 January 2010
Dodge Viper ACR 1:33 Edition

We heard about it in Los Angeles, and now we see it here in the D. Meet the 1:33 Edition of Dodge's most potent ever Viper. Why the name? We're glad you asked. Back in November, hot-shoe Dodge Chris Winkler managed to hammer the track-focused Viper ACR around Laguna Seca in 1:33.944, faster than any other production car has ever gone (Note: the spoiler says 1:33.915). Impressive, no? Only 33 of these special Vipers are being built.

Here's what makes 'em so grand: Thanks to new, more bonkers gearing, the 600-horsepower monster does everything quicker. Try this statistic on for size: 0 to 202 miles-per-hour happens 14 seconds quicker with this 2010 Viper ACR than the 2009 model. Can we get a wolf whistle? The 1:33 Edition also gets a unique two-tone Black Clear Coat/Red Clear Coat exterior color, the inverse of the original ACR, as well as modified end caps on its massive carbon-fiber wing, too. We're going to miss the uncircumsized Dodge Viper (how would you describe it?), but at least it's going out with a big bang.

Detroit 2010: Dodge Nitro Detonator

12 January 2010
Dodge Nitro Detonator

Dodge is rolling out three special edition Nitros here at the Detroit Auto Show named Heat, Detonator and Shock. For now, we're focusing on the Detonator, a massively loud yellow mid-size SUV. Aside from the eye-scorching paint, the Nitro Detonator gets standard 20-inch wheels, eight premium speakers hooked into a 368-watt amp plus a nine-inch subwoofer. Tinted glass, too.

The real news, however, is the engine. All three special edition Nitros get an aluminum 4.0-liter V6 that makes 23 percent more horsepower and 12 percent more torque. Specifically, the overhead cam V6 pumps out 260 hp and 265 lb-ft of torque. That's some decent grunt, though a 4.0-liter-V6-powered Nissan Pathfinder makes 266 hp and 288 lb-ft of torque. However, the Nitro Detonator has gray stripes on the hood. Costs $25,995, too.

First Drive: 2010 Dodge Ram HD

21 November 2009
2010 Dodge Ram HD

Back in 1993, truck drivers had no choice but to depend on domestic automakers for work-ready pickups, and only Ford and General Motors offered competitive haulers. That all changed a year later when Dodge set the pickup truck market on its leaf springs with the introduction of its all-new Ram. With a big-rig appearance thanks to an imposing front grille that looked ready to kick you in the Truck Nutz, Dodge's truck sales tripled inside of 12 months and gave load-hauling manly men a real alternative to Ford and Chevy. But while Dodge hit a home run with the 1994 Ram, the Penta-horned brand didn't have a heavy-duty option in its lineup until 2003, and an all-important diesel powerplant didn't come online until 2004. In 2008, Dodge filled out its pickup lineup with heavy-duty 4500 and 5500 variants, finally giving Chrysler's trucking arm the range of choices necessary to get plucky with the competition from Detroit and Dearborn.

Last year, Dodge introduced a new light-duty Ram, with sleek updated aesthetics and controversial coil springs that provide a superior ride at the expense of some towing and hauling capability. Fast-forward a year and the truckmakers at Chrysler are set to unleash a new heavy-duty Ram that's been redesigned to provide customers more capability, more options and a better ride while competing against offerings from its crosstown rivals with a lower cost of entry. We headed out to Ann Arbor, MI to drive, tow, brake, climb and traverse in the new Ram HD to see if Chrysler's truck team has succeeded.

When it comes to passenger cars, it's difficult to discern exactly what your customer base is after. An automaker can make a sedan with good power and handling, fine interior appointments and tons of room for four adults, yet the final product can still go over like a herpes flare-up. Trucks are a bit different. If you can deliver rugged good looks; strong, usable power; plenty of storage and top-notch reliability, chances are customers are going to find you. After all, there were 1.6 million trucks sold in the U.S. last year; about one-in-eight of the total consumer-grade vehicles sold, so there's plenty of reward for a job done right.

But the trick to nailing a top-notch pickup is working tirelessly with customers to figure out who buys trucks and how they're used, and the guys and gals at Dodge have it down to an exact science. How exact? Dodge's marketing team tells us that a typical truck buyer is a 55-year-old male, about 5' 11" and 203 pounds. There is a 67-percent chance that customer is going to have at least one dog (half the animal owners have two or more), and there's a 58-percent chance he tows a trailer.



To cater to that core customer, every Dodge Ram HD comes with a standard Class IV hitch, along with both four- and seven-pin hookups. As is increasingly common these days, Dodge is also offering an optional trailer brake package integrated into the dashboard. And since the guys who use their truck for work all week typically also use that truck on the weekends, the new Ram HD now has a crew cab configuration to ensure there's enough room for the camper, the family and the dog.

The new Dodge Ram HD looks smooth, maybe even a bit sexy.
Truck buyers demand a lot out of their pickups, and utility will always take precedence over appearance in the heavy-duty segment. But that doesn't mean looks are unimportant. HD-class pickups need too look, well, heavy-duty, and this new Ram has bad-ass written all over it. For 2010, the Ram's already substantial crosshair grille gets even bigger, with enough chrome to fry even the most bling-resistant of retinas. The shiny metal parade continues with the bumper, which has been impressively fashioned from a single chunk of metal.

The hood now has a prominent power dome that seems to be all the rage these days and the headlamps received the same treatment as Dodge's light-duty model, only bigger. Arguably the most impressive design feature of the new Ram is a dually exclusive. Dodge decided to shy away from the composite body panels to cover the rear tires, instead opting to stamp the dually rig's rear quarters using honest-to-goodness steel. The look is smooth, maybe even a bit sexy, especially if trucks that can tow 17,000 pounds is your thing.



In all, Dodge manages to make an already manly looking truck even more rough and ready. Gaps are tighter, sheetmetal is curvier and everything just looks brawnier. But today's heavy-duty truck buyer is shelling out anywhere from $30,000 to over $60,000 for the right to go big, and they demand a functional, configurable and comfortable interior. The 2010 Dodge Ram HD has an interior for every taste, from a regular cab for work applications to the crew cab and even a largest-in-class mega cab.

We spent the majority of our time in a Ram 2500 SLT crew cab with a 6' 4" bed. Dodge says this is their volume truck, so we were more than happy to take the Cummins diesel-powered example as our test model. Over the course of our testing at Chrysler's Chelsea, MI proving grounds, it proved to be a nice place to work. First off, the crew cab's cabin is huge – which is expected of a four-door pickup weighing more than 6,000 pounds. There's so much room inside the new Ram HD that Dodge engineers found enough space to throw in 42 storage areas – up from 24 cubbies in the last-gen Heavy Duty. While some of those compartments are only big enough to handle a cell phone or a couple packs of gum, others are large and quite handy. The massive glovebox can fit drinks for everyone in the cabin, while the in-floor cooler can fit added refreshments plus ice.



Beyond a plethora of cab configurations, Dodge is also offering two different levels of interior refinement. The base interior, in which we spent most of our time, is fine for most applications, with harder plastics better suited to a work site than a trip to the opera. It'll be fine for most truck owners, though, with comfortable seats and armrests aplenty. We did manage to spend some time in an upscale Laramie model, which contains the same top-notch materials found in the higher-spec light-duty Ram. Soft touch, leather-like materials abound, and the hide-wrapped steering wheel is one of the best in the business – even eclipsing the offerings from Ford or GM's truck.

But while a great cabin certainly helps both the recreational and work truck buyer do their job in comfort, the most important factor is capability. And since the Ram HD can haul up to 24,500 GCWR, we're confident the newest Dodge has all the skills that most truck buyers could ever need. During our stint with the Ram HD, we were given the opportunity to drive three Dually 3500 models, each towing or hauling something significant. The first model, a regular cab model with a six-speed manual transmission and an eight-foot bed, had over 1,200 pounds of straw strapped to its back. The 350 horsepower and 650 lb-ft of torque provided by the 6.7-liter Cummins inline-six diesel engine (which carries a $7,615 price tag over the standard HEMI V8) hauled this big load without breaking a sweat, though rowing our own gears isn't nearly as much fun when motivating 8,000 pounds of truck.




The giant bale of straw was only an appetizer, though. The big fun was to be had when we got behind the wheel of a Ram 3500 Crew Cab Dually with an eight-foot box. Latched onto the truck's bed was a trailer containing a Case IH Maxxum 125 tractor. That's 16,500 pounds of tractor and trailer – exactly the sort of payload you pictured yourself hauling as a kid playing with Tonka Trucks. With all that weight in tow, the Ram HD's best-in-class 650 lb-ft of torque at 1,500 RPM came in handy. Taking off from a stop was a snap, and coming to a halt wasn't as laborious as expected. The Cummins I6 displayed steady grunt when towing the load, never feeling overmatched. Once up to speed, we were able to shift our own gears thanks to Dodge's Electronic Range Select feature, which lets the driver manually limit the highest available gear. ERS comes in handy when traversing steep grades while hauling a big load, as there are only so many algorithms engineers can program to provide up/down shifts exactly when you need them. Turning was made a bit easier with the aid of the new Ram's excellent sideview mirrors, which kept a crystal clear picture of everything going on around our super-sized cargo.

The Ram HD also has a few features that make hauling a big load safer. Diesel models now come with a standard exhaust brake that can be turned on and off via a switch on the dash. The exhaust brake shuts down the turbos, using engine compression to slow down the mini big rig, which also reduces brake fade when hauling loads on downhill grades. We weren't able to test the exhaust brake during our time hauling the Case IH Maxxum 125 tractor, but we did try out another way Dodge engineers were able to make the Ram HD easier to stop. While coasting at 60 MPH, we were instructed to simply ease off the accelerator and tap the brake. The integrated trailer brake controller worked in concert with the Ram's six-speed auto 'box to quickly slow over 24,000 lbs of steel, glass and rubber without overtaxing the truck's disc brakes.



Dodge appears to have built a work truck for everybody from the grunt to the site foreman, and the horned beast is looking to appeal to the ardent off-roader as well. The new 2010 Ram HD Power Wagon is no joke. Its 33-inch LT285/70R17D BF Goodrich All-Terrain tires, solid axles, locking front and rear differentials and electronic sway bar disconnect have banded together to accomplish one goal: making you a superstar when tackling the wild. Dodge set up a sweet off-road gauntlet within its proving grounds to properly test the Power Wagon's prowess. We simply put the Ram into 4WD low and headed off into the rough stuff.

Chrysler has a great opportunity to improve upon its 23-percent share of the HD truck market.
The course contained uphill and downhill grades, massive boulders, several inches of mud and even a steep, dirt-encrusted log bridge. The Power Wagon cut through all of the obstacles without breaking a sweat, with the 383-hp HEMI V8 (the Cummins diesel isn't available on the Power Wagon) providing plenty of punch for anything we were able to throw at it.

Dodge management challenged its truck engineers to deliver similar ride quality improvements to its heavy-duty offerings as it did with the light-duty Ram, but without the use of coil springs. We wouldn't exactly say those engineers nailed this request like a Rodney Dangerfield Triple Lindy, but we would definitely call the new Ram HD a more comfortable cruiser than the outgoing model. Among the engineering changes for 2010 are mounts that connect the C-Pillar to the truck's frame, resulting in less cabin shake on rough roads. The new Ram is also quieter on the inside with the aid of triple sealed doors and improved aerodynamics. The change is noticeable when holding conversations on the open road, and we were even able to talk in muted tones when traversing the gauntlet in the Power Wagon.



After spending a day with the extensive lineup of heavy-duty Dodge Rams, we're confident that Chrysler's truck division has a reasonable shot at improving upon its 23-percent share of the HD truck market. That's already a big chunk of pie in a segment Dodge has only played in for seven years, and a new-and-improved truck for 2010 that will retail for less money than the model it replaces makes the fight for customers a bit more interesting. Dodge's new trucks are now more competitive than ever with improved aesthetics and ride quality, terrific interiors, more configurations and improved capability. At the very least, the Mopar brand has put a lot of pressure on the competition to hit a home run with new product offerings next year. Because if Ford or GM miss, Dodge will be more than happy to take their customers and run.

[Source: Autoblog]

Ram hybrid coming in 2010

31 October 2009
Ram hybrid coming in 2010

According to The Detroit News, the big joint development program formed several years ago between General Motors, Daimler, Chrysler and BMW to develop a two-mode hybrid system for light duty vehicles is over. With all four automakers now having launched versions of the gas-electric system, the joint program is being wound down and the Troy, Michigan office where engineers from each company collaborated will be closed by the end of this year. Most of the joint work actually ended last June and many of the staff have already been relocated to other facilities.

The Mercedes-Benz ML450 hybrid and BMW X6 ActiveHybrid are both going into production right about now using a version of the two mode transmission built by Daimler. Chrysler, which briefly built a version of the Durango and Aspen SUVs with the hybrid system last year, remains committed to re-launching the system in the Ram pickups in 2010. At this point, however, it looks unlikely that the planned light-duty hybrid will launch anytime soon in the Ram 1500.

[Source: The Detroit News]

First Drive: Classic Design Concepts Group 2 Widebody Challenger

02 May 2009
CDC Group 2 Widebody Challenger

The Challenger SRT8 marked the official return last year of the musclecar to the Dodge lineup, and its retro styling, 425-horsepower V8 and tire-shredding capabilities had Mopar enthusiasts giddy with excitement. What, you say, could be much better? Enter Classic Design Concepts. The Novi, Michigan-based company has been adding its visual touch to cars since 1990, and recently tried its hand at Dodge's new musclecar. The result? The Group 2 Widebody Challenger that made its debut at SEMA in 2008. We were instantly smitten with the car's aggressive appearance on the show floor, and were determined to get a closer look if we ever had the chance. Jumping forward a couple of months, we recently learned that the car would be out in Southern California for a Mopar gathering. A phone call to CDC later and we were fortunate enough to land an afternoon behind the wheel of this 575-horsepower bona fide modern musclecar.

First off, let's get one thing straight: Classic Design Concepts isn't your typical body kit manufacturer. The fit and finish on all of its products is at or above OE quality, which is why companies like Ford, Saleen and Roush have relied on CDC to supply parts for their cars. Remember that cool functional hood scoop on the Mach 1 Mustang built in 2003? It was designed and built by Classic Design Concepts. All products also come with their own three-year warranty on manufacturer defects.



You might wonder – as did we – why they don't build and sell a complete car of their own. We asked, and were told that CDC prefers to simply provide components and let customers create cars for themselves. Even so, the Group 2 Challenger has the look of a production car and we could easily picture it on a showroom floor.

Just like the stock Challenger, the Group 2 Widebody gets inspiration from Mopar models past. The overall theme of the car comes from a variety of 1970's Chrysler road racers, including five Hemi Cuda race cars that were campaigned by Chrysler of France from 1970 to 1973, and more famously, by the Challenger T/A driven by Sam Posey in the 1970 Trans-Am season. Each competed in a Group 2 classification – the Cudas in FIA and the Challenger T/A in SCCA, hence the name. Other visual cues, like the rear quarter panel extensions, have a direct link to the 1971 Plymouth Hemi Cuda.
So, just what is included in the Group 2 package? For starters, new composite front fenders, left and right spoiler canards (side wings) and rear "billboard" panel and fenderwell extensions. In total, the new body panels add six inches to the width of the Challenger. Not only does it look awesome, but it's functional too. The car can now accommodate 11.5-inch wide wheels at the rear and 10-inch wide wheels up front, enabling better grip for acceleration and cornering. Customers can purchase the package with USW 20-inch three-piece wheels and Pirelli PZero Rosso tires or find their own combination. Other options from Classic Design Concepts include a stainless steel wire mesh grille, sequential taillights and a fully functional shaker hood system, a CDC specialty.



This particular Challenger also has a few additional components not sold directly by Classic Design Concepts. Under the hood is a Vortech supercharger system that works in conjunction with the shaker hood system to boost the Hemi V8 to 575 horsepower, and out back, a Corsa exhaust system ensures a true muscle car sound emits from the tailpipes. Lastly, a KW coilover suspension system helps reduce body roll and improve handling, and a Baer drilled-and-slotted big brake upgrade provides additional stopping power.



While it's hard for a photograph to convey, the width of the CDC Group 2 Challenger is nothing short of impressive in person. The new fenders give the Challenger bold and beautiful curves at nearly every angle, and the difference is especially noticeable when juxtaposed with a stock Dodge Challenger. Although it barely seems possible, the Group 2 actually manages to make the standard production car look wimpy. In fact, we began to notice a growing trend as we spent more time with the car; everything that the stock Dodge Challenger embodies, the CDC Group 2 does so even more. If the Challenger reminds you of the muscle car era, the Group 2 makes you feel like you're actually there. Think driving around in Challenger SRT8 attracts attention? Try it in this bad boy. Parked at a gas station, we had people appear out of nowhere to come inspect the car. The Group 2 seems to be universally loved by car enthusiasts. Everyone from a Ford Mustang GT owner to a 20-something in a Mitsubishi Lancer Evo pulled over to have a look at the car.



And then there is the experience of actually driving the CDC Group 2 Challenger. We can't think of another modern vehicle that makes you feel this much like you're behind the wheel of a true take-no-prisoners muscle car. Mash the throttle and the Group 2 explodes off the line with tires howling and the tail wagging as the car fights for traction in spectacular muscle car fashion. It doesn't feel supercar fast – most likely because of its size – but just a few seconds on the gas and you'll be well past the legal speed limit. The only thing we'd change is the automatic transmission, and fortunately, Chrysler is now offering a six-speed manual for the Challenger. Check that option in the box, and we'd take this car as-is, no changes needed.



So what's the downside? Well, the Group 2 package is a wee bit expensive. All of the body components are $11,995 installed, or $5,895 not including wheels and tires. The shaker system, including the composite flat hood, adds another $2,495. So just to get the full look of this car, you're looking at nearly $14,500. To build this exact car, you'd also have to spend $6,400 (Vortech supercharger), $3,095 (KW adjustable coilovers), $3,525 (Baer Extreme Plus brakes) and $1,870 (Corsa exhaust system). Add that to the $42,745 price of a base Dodge Challenger SRT8 plus $695 for the manual transmission, and you end up with a $72,820 car.

The Classic Design Concepts Group 2 Widebody Challenger is kind of like the Shelby GT500KR of Mopars: based on a $20,000 car and probably not the best bang for your buck, but it's the ultimate version of a really cool car. So if the Dodge Challenger is your dream car, then the CDC Group 2 Widebody Challenger is the biggest, baddest, and, without a doubt, widest one you can get.
Base vehicle specs:
2008 Dodge Challenger SRT8
6.1LHEMI
5-Speed Automatic Transmission
Brilliant Black

CDC GROUP 2 Challenger Wide Body Kit – PN. 0832-7005-01
  • Package components Include:
  • Right and Left Composite Front Fenders
  • Right and Left Composite "Billboard" Rear Quarter Panel Extensions
  • Front and Rear Inner Wheel Well Extensions
  • Aerodynamic Front Spoiler "Canards"
  • Unique CDC GROUP 2 Exterior Badging and Numbered Console Plaque
Options on GROUP 2:
  • Challenger R/T - SRT8 Functional Shaker System
  • Challenger RTM Composite Flat Hood
GROUP 2 Specific Wheel and Tire Package:
  • Rims - USW Forged "Crossover" w/Three Piece Construction and unique spacing. Front – 20"X 10", Rear – 20" X 11.5"
  • Tires – Pirelli PZero Rosso Front - P275/40ZR 20, Rear – P315/35ZR 20
Other Modifications:
  • Vortech Supercharger
  • KW Coilover Suspension
  • Corsa Cat-Back Exhaust
  • Baer Extreme Plus Brake System


[Source: Autoblog]

Dodge Challenger SRT-8 vs planes and trains

31 March 2009

The guys over at Garage 419 are shamelessly ripping off Top Gear, but they not only admit it, they also added a third element. While Top Gear challenges usually pit a car against one form of mass transportation, these guys are putting a Dodge Challenger SRT8 up against a plane and a train.

Dodge Ram 3500HD

13 February 2009
2010 Dodge Ram 3500HD

When it comes to consumer loyalty, you'd be hard pressed to find a more dedicated group of fans outside the heavy-duty pickup segment. Recognizing this, Dodge has brought a slew of full-size trucks to the Chicago Auto Show in the form of the 2010 Dodge Ram 3500, 4500 and 5500 HD Chassis Cabs.

Dodge started the heavy-duty retrofit with the highly-competent 1500 model introduced last year, then proceeded to create a crew cab variant that's claimed to be packing the most room in its class. Both regular and Mega Cab variants will be offered, along with two bed sizes (six-foot, four-inch or eight-foot) and five trim levels: ST, SLT, TRX, Laramie and Power Wagon.

Pickup aficionados will notice the new bumper treatment, larger grille (with chrome, black or body-colored trim), wider fenders for the dually models and the subtle tailgate lip to improve aerodynamics.

The HD comes standard with Dodge's HEMI 5.7-liter V8, putting out 383 hp and 400 lb-ft of torque through a beefed-up 545RFE five-speed automatic. However, with a take-rate of over 90% for the diesel engine on HD models, Dodge is offering the optional 6.7-liter Cummins inline-six that channels 350 hp and 650 lb-ft of torque to a 68RFE six-speed automatic featuring low-speed "creeper" mode and Electronic Range Select, allowing the driver to limit which high gear is used while towing. Two 4x4 models will be offered, along with four different axle ratios, and on the topic of towing, the Ram 3500 HD, equipped with the Cummins turbodiesel, dual rear wheels, 4x4 system and a 4.10 rear axle ratio can handle a maximum payload of 5,110 pounds and a towing capacity of 18,500 pounds.

Record-setting Viper ACR makes an appearance

13 February 2009
Dodge Viper ACR

As Will Ferrell once said, "If you've got it, flaunt it." The boys at SRT are quite proud of the Viper ACR's 7:22.1 run of the Nürburgring, and they have brought the car out to Chicago to let everyone know who sits atop the podium. We would've assumed it was just your everyday Viper ACR except that the team that set the record has signed the carbon fiber rear wing including the driver, SRT engineer Tom Coronel. The record-setting run, which was done back in August, bested the likes of the Chevrolet Corvette ZR1 (7:22.4), Maserati MC12 (7:24.3), Pagani Zonda F Clubsport (7:24.7) and Ferrari Enzo (7:25.3). We've included a new gallery of the car from the show and embedded the video of the lap after the jump in case you missed it the first time around.

Mr. Norm’s Super Challenger

13 February 2009
Mr. Norm's Super Challenger

Along with Barack Obama, the Cubs, Al Capone and the Sears Tower, Chicago is home to the world's most famous Mopar dealer, Mr. Norm's legendary Grand Spaulding Dodge. While Mr. Norm sold the dealership in the late 1970's, the Mopar Hall of Famer has recently made a resurgence, officially introducing the 1968 Dodge GSS Hemi Dart last year in Chicago as well as the Super Cuda and Challenger at SEMA just a few months ago. The Challenger is making an appearance here in Chicago as well, with a slick new two-tone paint scheme and 900 supercharged horsepower underneath the hood. Other features include a carbon fiber front and rear spoiler, Katzkin leather interior, SSBC eight-piston front brakes, and a Hurst pistol grip shifter. Like the Hurst and its HEMI Challenger, Mr. Norm is selling a production version of the car with a a variety of styling options and performance levels ranging from 600 to 900 horsepower.